Products

Automatic Gate Openers Automatic Gate Openers

Industrial

Domestic

Farm Gates

Accessories

The FG-500 DC Automatic Farm Gate Opener

The FG-500 DC automatic farm gate opener is really easy to install. Simply bolt the drive unit onto the gate post and the bolt the latch & arm assembly onto your gate with "U-Bolts". The Solid Steel chasis & gears easily handle the large enertia of a 16' Farm gate. Add visitor push buttons or key pads & connect safe 12volt plug pack into mains power point. The gate's Auto Close can be set at 20 second or 40 seconds.

Download your FG500 Information Pack here

Below are some images of this kit, click any image for the full sized picture.


The FG-500 Opener In Action
Add Visitor Push Buttons
The Mechanical Latch
The Openers Solid Steel Gears

Each FG-500 DC Kit Includes:

  • 1 x Master Motor
  • 1 x Control panel
  • 1 x 9amp hour Battery
  • 1 x Receiver
  • 3 x Hand Transmitters
  • 1 x Primary Arm
  • 1 x Secondary Arm
  • 2 x Connecting Bolts
  • 4 x 3/8 x 75 Coach Screws
  • 1 x Mechanical Latch
  • 1 x Waterproof Pedestrian Push Button with 2mts of .75 wire
  • 1 x 10watt Solar Panel with 4mts of wire
  • 1 x 12Volt Plug Pack with 1.5mts of wire
  • 1 x Installation instructions
  • 1 x Card board template

Install This Opener in 5 Easy Steps

  1. Mount motor drive unit
  2. Adjust open/close limit switches
  3. Add mechanical latch
  4. Add power source example - 12VDC
  5. Enjoy the convienence & added security of your new remote controlled gates

The FG-500 DC Automatic Gate Opener Technical Data

  1. The device is used to drive swing gate.
  2. The control board and receiver inside operator.
  3. Unit has auto-reverse function.  
  4. Infrared (N.C) is supplied to use.
  5. Motor  speed:  1400r/min
  6. Output  torque:  10N·
  7. Limit  switch:  N.C
  8. Operating  distance:  30m  Frequency:433.92M
  9. Remote  control  model: 4 button
  10. Auto  close  time:  20/40  sec.
  11. Noise:  ≤62dB
  12. Environmental  temperature:  -10 +50°C